Machine-Type: M0257
Cold cutting
Working width:
Type 1:
40cm - 140cm
Type 2:
40cm - 220cm
Type of material to cut:
flat
hose
Consisting of the following modules:
- Base frame
- Extractor with dancer system
- Circle cutter with blade (cold cutting)
- Transport roller system with length measuring device
- Cross cutter with blade (cold cutting)
Cutting shapes:
Options:
Description:
A powerful cross cutting machine for coated fabrics, films or nonwoven products. This machine can be introduced for inlets and outlets in the field of FIBC production, for short cutting lengths. , Or. the optional length cutting unit, or triples this number of pieces. Flat and tube materials can be processed. The new cold cutting system guarantees maintenance and a quick blade change. The cut edges are clear and clean and leave no pearling. Another option is the marking unit. They identify the product with one to ten auxiliary points. These markings are used when creating signs, ribbons or fasteners as a docking point.
Detailed Options:
Mobile material cart
This trolley consists of a steel frame and four swivel castors, two of which are equipped with a brake. In addition, the car has a material receiving rod with two lateral Bergrenzungsscheiben or two cones.
Lifting devices without edge control
The device is a cost-effective alternative to our V3130 edge control hoist. In our experience, most of the fabric roll is now straight-edged. Even if small displacements occur on the fabric rolls, our machines still have a centrally extending material web. It can roles, as with the model V3130 to max. 1000 kg are lifted. The pickup bar for the material rolls is equipped with two aluminum rings, which serve for lateral fixation of the rolls. The applied brake band reduces the running of the roller during a stop.
Lifting devices with edge control
This lifting device with edge control, model V3130, can handle material rolls up to max. Lift 1000 kg. Next, the station with a receiving rod and two rings, which serve for lateral fixation of the rollers, stocked. A product edge is constantly scanned during the run over 2 photocells and automatically corrected by the integrated actuator when the goods are running. The material web therefore always enters a defined position in the subsequent machine. The applied brake band reduces the running of the roller during a stop.
Line and dot marking system with pen
V2001-02 Inexpensive marking device with pen holders and rail system for applying lines and / or dots. When marking points, the material flow stops for a short time and the pen is lowered onto the material.
4-point marking system with pen
V2002-4P Inexpensive marking device with four pen holders for marking 4 points. The pen holders can be adjusted with an adjustable cross to the respective size. If a circle or shape cutter is used, the dots are applied at the same time as the blank.
Fast marking system with spray head
This marking system applies dots and lines without stopping the material. This system can be integrated into almost all types of machines as it uses its own control electronics. The system is integrated in a compact frame which also allows installation in third-party systems.
Slitter with blade (cold cutting)
To separate the webs if a smaller material width is needed. When using multiple slitters, the number of small blanks can be increased enormously.
Stacking table
The storage table consists of a tubular steel frame and table top. On request, this can be ordered with a false floor. The table depth is 100cm. The table width results from the working width of the machine.
Technical data:
| Working width: | 140cm / 220cm (special sizes on request) |
| Cuttting system: | Cold cutting with blade |
| Circle cutter: | Ø 200mm – 590mm infinitely adjustable (special sizes on request) |
| Power connection: | 400V / 50Hz |
| Compressed air connection: | approx. 8bar |
| Operating air pressure: | approx. 6bar |